Nitrogen Reflow or Soldering Provides Improved soldering quality specially for Pb-Free Assembly. Higher surface tension as well as less reoxidation of IC terminals will increase the wetted surface by 20% to 30%, resulting in increasing solder joint strength. Higher surface tension minimizes solder balling when using fine pitch solder paste. Less oxidation also improves the wetting on NiAu and bare copper solder lands. Also the soldering process will be less sensitive to poor solderability and solder lands and component terminals, thereby improving the soldering BGA and CSP devices. Visual appearance of the solder joint surface will be smoother and shinier, especially for Pb-Free Assembly making it easy to inspect and rework. Larger surface tension can hold larger and heavier components on bottom side when performing double reflow.

Automated Optical Inspection(AOI): AOI is an automated visual inspection methodology used primarily to test for defects in printed circuit board assemblies (PCBAs). AOI autonomously scans PCBAs with cameras and detects catastrophic failures, such as missing components, and quality failures, such as misshapen fillet or components that are skewed.
AOI works best in production environments with very high volumes and very low component variabili

X-Ray Inspection: X-ray inspection is ideal for more complex boards and offers some capabilities that other inspection methods do not, such as the ability to see through chip packages. It also works well for inspecting densely packed PCBs and allows for a more detailed inspection of solder joints. The technology is a bit newer and more complex, and it can be more expensive. It is economical only if you have a high volume of densely populated boards with BGAs, CSPs and other such packages.

Flying Probe Testing for PCB’s. Our Fabrication house will provide this service to make sure the boards are error free

An ESD and climate controlled environment is also utilized to ensure that the finished products meet all standards of efficiency, reliability, and quality

.All our processes are continually reviewed and updated per ISO requirement. We have one certified IPC Trainer and all the manufacturing staff is certified IPC Specialist.